Dell C7765dn User Manual page 360

Color multifunction printer

Hide thumbs Also See for C7765dn:

Table of Contents

Select [Enabled] to use IPP.

Set this when you want to use IPP (Internet Printing Protocol) to print via the Internet.

Added Port Number

Select [Disabled] when you want to set the machine does not accept IPP from other than the

standard port number, or select [Enabled] when accepts all port numbers.

Enter a port number for IPP other than the standard port number from 1 to 65535.

The default value is 80.

Select [Enabled] to use EtherTalk.

Select [Enabled] to use Bonjour.

Select [Enabled] to use Port9100.

Select this option when the communication protocol is in RAW format for Windows

Standard TCP/IP port monitor.

Enter a port number for Port9100 from 1 to 65535.

The default value is 9100.

Select [Enabled] to use SNMP, when you use any web applications to control the machine

on the network.

Select [Enabled] when you use the Scan to PC service with FTP transmission.

• Do not use a number that is the same as a port number of another port. However, you can use the

same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,

WebDAV, and Web Services on Devices (WSD)).

• [Added Port Number] cannot be configured if [Port Status] is set to [Disabled].

To configure [Added Port Number], enable port status and reboot the machine, and then configure

[Added Port Number].

• To print from a printer detected by [Bonjour], the LPD port must be activated in advance.

• Do not use the numbers assigned to the other ports.

Chapters

Table of Contents