Dell C7765dn User Manual page 335

Offset Stacking (Right Middle Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray,
the next set is delivered to the rear of the tray. Set the offset function for the Right Middle
Tray. Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set]
or [Offset per Job] is selected, the machine slightly shifts the output position per set or per
job (print job) respectively.
Note
Booklet Offset
When [Offset Stacking (Center Tray)] or [Offset Stacking (Right Middle Tray)] is set to
[Offset per Set], the paper is output to the tray by being slightly displaced by set. If, however,
[Fold & Staple] is selected for booklet settings, the paper is not output by set.
Note
Auto Job Promotion
You can select whether or not to allow another job to automatically bypass the current job
when the machine is unable to start an operation for any reason, (for example, running out
of paper in a tray when starting copying or printing).
Note
Default Print Paper Size
You can set the most commonly-used paper size, A4 or 8.5 x 11", to print reports and/or lists.
Odd Page 2 Sided
You can specify whether or not to add a blank page when a document containing an odd
number of pages is printed in 2-sided.
Paper Size Settings
You can specify the size of paper to be automatically detected when you use standard sizes
of a document or the machine is set to detect sizes of a document.
You can select from the following tables: [A/B Series (8 x 13")], [A/B Series], [A/B Series (8K/
16K)], [A/B Series (8 x 13"/8 x 14")], and [Inch Series].
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
• An optional component is required to use this feature. For more information, contact Customer
Support at dell.com/contactdell.
• Stored documents such as Secure Print and Sample Set documents cannot be used with the Auto Job
Promotion feature.
• When [Enabled] is selected and there is a job bypassed because of paper out, a message stating the
reason of the job promotion appears. The job bypassed can be processed after you take proper
measures by following the instruction of the message. Or, you can cancel the job by pressing the
<Clear All> button. When multiple jobs are bypassed, a screen that lists the bypassed jobs appears.
This screen allows you to display the details screen and to delete the jobs.
Common Service Settings
335