Registering Stored Programs For Build Job; Deleting Stored Programs - Dell C7765dn User Manual

7 Stored Programming
• If the Fax service is available, one-touch buttons can be used.

Registering Stored Programs for Build Job

Up to 100 actions can be registered with one stored program for Build Job. Up to 40 stored
programs can be registered in the machine.
The following describes how to register actions with stored programs.
1
Select [Store Build Job].
Note
2
Select a number to register a stored program.
Note
3
Set the feature you want to register.
Note
You can change the volume of the sound that notifies that a stored program is being registered. For
information on the settings, refer to "Stored Programming Tone" (P.319).
4
Press the <Start> or <Clear All> button.
Note
For information on how to name a registered stored program, refer to "Entering/Changing a Stored
Program Name" (P.181).

Deleting Stored Programs

The following describes how to delete stored programs.
1
Select [Delete].
2
Select the number to delete.
Note
180
• Once a job is stored to a button, it cannot be
overwritten.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Once a job is stored to a button, it cannot be overwritten.
• Select [ ] to return to the previous screen or [
• The machine sounds an audible tone while a stored program is being registered.
• Press the <Interrupt> button to cancel registration.
• An icon is displayed to the left of each registered stored program for Build Job.
• If no name is entered for a registered stored program, the name becomes "(No Name)".
• Select [ ] to return to the previous screen or [
] to move to the next screen.
] to move to the next screen.