Dell C7765dn User Manual page 631

Status Code
018-400
[Cause]
[Remedy] Remove the inconsistency of the IPSec settings, and enable IPSec again.
018-405
[Cause]
[Remedy] The account is disabled in the active directory of the authentication server, or the access
018-500
[Cause]
[Remedy] Configure the server certificate. Or, cancel authentication.
018-501
[Cause]
[Remedy] Check the network connection and the address of the CA server.
018-502
[Cause]
[Remedy] Confirm the property information for the specified user, and check whether the
018-503
[Cause]
018-504
[Remedy] Execute the authentication operation again.
018-505
[Cause]
[Remedy] Check whether the user name and password of the SMTP server registered in the
Note
For information on how to change the account settings on other version of Mac OS, consult your
system administrator or the official website of Apple Inc.
018-506
[Cause]
[Remedy] Execute the authentication operation again.
Although IPSec is enabled, the IPSec settings are inconsistent.
• Although [Authenticate by Preshared Key] is set in [IKE Authentication Method], a
passcode is not set.
• Although [Authenticate by Digital Signature] is set in [IKE Authentication Method],
an IPSec certificate is not set.
• When [Authenticate by Preshared Key] is set in [IKE Authentication Method], set the
passcode.
• When [Authenticate by Digital Signature] is set in [IKE Authentication Method], set
an IPSec certificate.
An error occurred during LDAP authentication.
is set to disabled. Consult your network administrator.
The certificate does not exist in the authentication server.
Communications with the CA server set in the machine failed.
The machine failed to transfer data using SMB of the Scan to PC service because
computers allowed to login are restricted.
computers allowed to login to the server are restricted.
Communications with the CA server set in the machine failed.
Failed to log into the destination computer while transferring data using SMB of the
Scan to PC service.
machine is correct.
• The password cannot be confirmed. If you have forgotten the password, reset the password.
Consult your system administrator for the password reset procedure.
• When using Windows Server 2003, be sure to match the time set on the SMB server and the
machine.
• When the destination computer is Macintosh, you need to change the account settings of the
shared folder so that file sharing with Windows users becomes available. For information about
necessary accounting settings, consult your system administrator.
The following is an example of a procedure for Mac OS X 10.6. It is recommended that users create
a dedicated account for data transfer. You can create and set the account on the dialog box that
appears by choosing Apple menu > [System Preferences] and then clicking [Accounts] icon.
1.
From Apple menu, choose [System Preferences], and then click [Sharing].
2.
Make sure that [File Sharing] check box is selected, and then click [Options].
3.
Select [Share files and folders using SMB].
4.
Select the user accounts to enable for file sharing. Enter the user's password, then
click [OK].
5.
Click [Done].
Communications with the CA server set in the machine failed.
Cause and Remedy
Status Code
631