Dell C7765dn User Manual page 679

Status Code
127-220
[Cause]
127-221
[Remedy] Disconnect the print server cable, and then securely insert the cable into the connector.
127-310
[Cause]
127-311
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
127-312
127-313
127-314
127-315
127-320
127-337
127-342
127-353
127-354
127-396
127-398
127-399
133-210
[Cause]
133-211
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-212
133-213
133-214
133-215
133-216
133-217
133-218
133-219
133-220
133-221
133-222
133-223
133-224
133-226
[Cause]
[Remedy] Contact Customer Support at dell.com/contactdell.
133-280
[Cause]
133-281
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
133-282
133-283
133-700
[Cause]
[Remedy] Check whether the staple/hole punch position is correct, and then execute the operation
A communication error occurred between the machine and the Print Server.
Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
A country/region code not supported by the machine was specified.
An error occurred during fax transmission.
on the machine power. If the error still is not resolved, contact Customer Support at
dell.com/contactdell.
The staple/hole punch setting was cancelled.
again.
Cause and Remedy
Status Code
679