Dell C7765dn User Manual page 629

Status Code
016-794
[Cause]
[Remedy] Check whether the media is inserted correctly.
016-795
[Cause]
016-796
[Remedy] On a computer, confirm the content recorded on the media.
016-797
016-799
[Cause]
[Remedy] Check the print data of the application and the Print Setup settings, and try printing
017-700
[Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
017-701
[Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
017-702
[Cause]
[Remedy] Confirm the connection to the ThinPrint.Engine.
017-703
[Cause]
[Remedy] Split the job, and try printing again.
017-704
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
017-705
[Cause]
017-706
[Remedy] Check the server certificate information (expiry date and address) that is registered to
017-707
017-708
017-709
[Cause]
[Remedy] Check the settings of the machine.
017-713
[Cause]
[Remedy] Change SSL/TLS communication setting to other than [STARTTLS].
017-714
[Cause]
[Remedy] Confirm whether the SMTP server supports SSL connection. If the server supports it,
017-715
[Cause]
[Remedy] Use the valid SSL server certificate of the SMTP server. You can avoid this error by
017-716
[Cause]
[Remedy] Use the valid SSL server certificate of the SMTP server. You can avoid this error by
Media is not inserted correctly.
An error occurred when reading the data on the media.
An invalid print parameter is included in the print data of the application, or the print
data and the Print Setup settings may not match.
again.
ThinPrint.Engine connection timed out.
An error occurred while connecting to ThinPrint.Engine.
The data sent to ThinPrint.Engine is invalid.
The print data sent from ThinPrint.Engine exceeded the maximum size of the machine.
An internal error occurred.
on the machine power. Send the job again.
ThinPrint.Engine SSL authentication error.
ThinPrint.Engine.
An SSL communication error occurred between ThinPrint.Engine and the machine.
The SMTP server does not support STARTTLS.
SSL connection to the SMTP server failed.
check the port number of the SMTP server. If the error still is not resolved, contact
Customer Support at dell.com/contactdell.
SMTP server SSL authentication error. The server certificate is invalid.
setting [SMTP - SSL / TLS Communication] in [SSL / TLS Settings] to [Disabled],
however the validity of the server cannot be warranted.
SMTP server SSL authentication error. It is before the valid period of the server
certificate.
setting [SMTP - SSL / TLS Communication] in [SSL / TLS Settings] to [Disabled],
however the validity of the server cannot be warranted.
Cause and Remedy
Status Code
629