Dell C7765dn User Manual page 675

Status Code
116-790
[Cause]
[Remedy] For 1), manually staple the first set of the document. Or, do not cancel printing of a
117-312
[Cause]
[Remedy] Contact Customer Support at dell.com/contactdell.
117-326
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
117-331
[Cause]
117-332
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
117-333
118-310
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
118-311
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
121-311
[Cause]
[Remedy] Once a smart card reader is connected to the machine, the machine automatically
121-314
[Cause]
121-316
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
121-318
121-319
121-320
121-321
121-322
121-323
121-324
121-333
[Cause]
[Remedy] Confirm that the device is switched on, and then switch off the machine power, make
Probable causes are as follows:
1)If the operator cancelled printing a document that was received using the Store Fax -
Local Folder or Store Internet Fax - Local Folder feature:
The first set of the document is not stapled.
2)For causes other than 1)
No set of the document is stapled.
document that is received using the Store Fax - Local Folder or Store Internet Fax -
Local Folder feature.
For 2), check whether the staple position has been correctly specified, and try printing
again.
An error occurred in the machine.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred during software processing.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred between the machine and the device connected.
changes the [Passcode Entry for Smart Card Login] setting to [On] under [Tools] >
[Authentication / Security Settings] > [Authentication] > [Passcode Policy]. Change
the setting as required.
An error occurred between the machine and the device connected.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
An error occurred between the machine and the device connected.
sure that the touch screen is blank, and switch on the machine power. If the error still is
not resolved, contact Customer Support at dell.com/contactdell.
Cause and Remedy
Status Code
675