Checking The Content Status - Dell C7765dn User Manual

Status Code
04-307
In case the status code is displayed on the touch panel:
[Cause]
[Remedy] From a computer or other platforms, access the cloud service and delete some data.
In case the status code is displayed in the report:
[Cause]
[Remedy] For 1, access the cloud service from a computer or other platforms, and delete some data.
04-309
[Cause]
[Remedy] Check the content of the item.
04-310
[Cause]
[Remedy] Log in to the cloud server from the machine by using [Access Google Drive] feature.
04-401
[Cause]
[Remedy] Close the error screen, and select [Refresh] to refresh the display. If you are using an
Note
04-501
[Cause]
[Remedy] For 1, select a collection named with only English and the default language.
11-xxx
[Cause]
(xxx: 001-
[Remedy] Check for a newer version of this feature. If you were already using the latest version,
999)
For checking the version of this feature, refer to "Checking the Content Status" (P.795).

Checking the Content Status

Confirm the software version for this feature. Contents status for this feature may be needed
when contacting the customer support. Follow the procedure below to check the contents
status.
1
While using this feature, hold the <Dial Pause> button on the control panel for more than
five seconds.
The data amount in the cloud service exceeded the limit.
1) The data amount in the cloud service exceeded the limit.
2) The scan data size exceeded the limit of one-time upload.
For 2, reduce the data size, by reducing the document pages or [Resolution]. Then scan
again.
The selected item has no content.
Cannot log in to the cloud service upon carrying out a job flow sheet.
The selected collection/file does not exist.
automatic uploading feature, delete and create the job flow sheet again.
• If you are using an automatic uploading feature, you cannot solve this problem by creating a
collection with the same name as the one specified in the job flow sheet. However, if the specified
collection is grouped as a collection scheduled for removal, the problem may be solved by placing
the collection back to its original group.
An error occurred during scanning. Probable causes are as follows:
1) A language other than English and the default language is included in the name of
the collection which the scan data is to be linked to.
2) A language other than English and the default language is included in the name of
the scan data file.
3) An internal error occurred.
For 2, change the file name.
For 3, contact Customer Support at dell.com/contactdell.
A problem occurred with this feature.
contact Customer Support at dell.com/contactdell.
Cause and Remedy
Problem Solving
795