Dell C7765dn User Manual page 569

Symptom
Paper is often Is the paper loaded correctly
jammed or in the tray?
wrinkled.
Is the paper tray inserted
correctly?
Is the paper damp?
Is the paper curled?
Are the paper and paper tray
settings correct?
Are any torn pieces of paper
remaining or is there a foreign
object in the machine?
Is non-standard paper loaded
in the tray?
Is paper exceeding the
maximum fill line in the tray?
Are the paper guides set
correctly?
Is the image nearly the same
size as the paper?
Is the paper finely cut out?
A document is not Is the document small?
fed into the
document feeder.
An error message Check the positions of the
appears after paper guides of Tray 5.
paper is loaded in
Tray 5 and the
<Start> button is
pressed.
Cause
Load the paper correctly.
Refer to "Loading Paper" (P.237).
Firmly push in the paper tray until it stops to
insert it correctly.
Refer to "Loading Paper" (P.237).
Replace the paper with new one.
Refer to "Loading Paper" (P.237).
Turn over the paper in the tray, or replace the
paper with new one.
Refer to "Loading Paper" (P.237).
Correctly set the paper and paper trays to
correspond to the paper.
Refer to "Changing the Paper Settings"
(P.244).
Open the cover of the machine or slide out
the paper tray to remove the torn pieces or
the foreign object.
Refer to "Paper Jams" (P.681) or "Loading
Paper" (P.237).
Replace with paper that meets machine
specifications.
Refer to "Paper Types" (P.226) or "Loading
Paper" (P.237).
Load paper in the paper tray so that it does
not exceed the maximum fill line.
Refer to "Loading Paper" (P.237).
Load the paper correctly, and align the paper
guides to the paper.
Refer to "Loading Paper" (P.237) or
"Changing the Paper Size" (P.241).
Increase the edge erase widths.
For more information, refer to "Copy" (P.59)
when you copying, or to the help of the print
driver when printing.
Some types of paper may not be cut out
finely. Load the paper after fanning it well.
The minimum size of the document that can
be loaded on the document feeder is 125 x 85
mm (Standard size: A5, A5 ).
Refer to "Copying Procedure" (P.60).
Adjust the paper guides to the correct
positions.
Refer to "Loading Paper in Tray 5 (Bypass
Tray)" (P.238).
Machine Trouble
Remedy
569