Dell C7765dn User Manual page 257

3
Take the staple cartridge out of the finisher.
Note • The staple cartridge is firmly inserted. A slight
force is required to pull the cartridge out of the
finisher.
4
Pinch both sides of the empty staple case with
your fingers (1), and remove the staple case
from the cartridge (2).
5
Insert the front side of the new staple case into
the staple cartridge (1), and then push the rear
side into the cartridge (2).
6
Push the staple cartridge into the finisher until
it clicks into place.
7
Close the finisher front cover.
• If the front cover is not closed completely, a message appears and the machine will remain paused.
Note
Replacing Consumables
257