Dell C7765dn User Manual page 617

Status Code
016-450
[Cause]
[Remedy] Change the host name.
Refer to "Host Name" (P.366).
016-453
[Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
016-454
[Cause]
[Remedy] Confirm the DNS configuration and IP address retrieve setting.
Refer to "Protocol Settings" (P.363).
016-455
[Cause]
[Remedy] Confirm the network cable connection and the IP address of the SNTP server are
Refer to "Machine Clock/Timers" (P.314).
016-456
[Cause]
[Remedy] Confirm the SNTP server settings.
Refer to "Machine Clock/Timers" (P.314).
016-500
[Cause]
016-501
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
016-502
016-503
[Cause]
[Remedy] Check on Dell Printer Configuration Web Tool whether the SMTP server settings are
016-504
[Cause]
[Remedy] Check on Dell Printer Configuration Web Tool whether the POP3 server settings are
016-505
[Cause]
[Remedy] Check on Dell Printer Configuration Web Tool whether the user name and password
016-513
[Cause]
[Remedy] For 1), wait for a while, and then execute the operation again.
016-514
[Cause]
[Remedy] If an error occurred while printing from a driver which supports XPS, print from the
Note
The SMB host name already exists.
Updating of the IPv6 address and host name for the DNS server failed.
Unable to retrieve the IP address from DNS.
Connection to the SNTP server timed out.
correct.
Received a message from the SNTP server stating that the server is not synchronized
with the standard time source.
An error occurred.
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
Unable to resolve the SMTP server name when sending e-mail.
correct. Also, confirm whether the DNS server settings are correct.
Unable to resolve the POP3 server name when sending e-mail.
correct. Also, confirm whether the DNS server settings are correct.
Unable to log into the POP3 server when sending e-mail.
used on the POP3 server are correct.
An error occurred in connecting to the SMTP server. Probable causes are as follows:
1)The SMTP server or network may be overloaded.
2)The source port number for SMTP is incorrect.
For 2), confirm whether the source port number for SMTP is correct.
An error occurred during processing of an XPS document.
application using another print driver (PCL, etc.).
If an error occurred while direct printing an XPS document (such as E-mail and Media
Print - Text), print using the print driver (PCL, etc.) from XPS Document Viewer.
• XPS stands for XML Paper Specification.
Cause and Remedy
Status Code
617