Output Color (Selecting The Color For Copying) - Dell C7765dn User Manual

Output Color (Selecting the Color for Copying)

This feature allows you to select copy colors.
Note
1
Select a color mode.
Auto Detect
The machine automatically determines the colors of the original document and makes
copies in full color if the original document is colored, and in single color (black) if the
document is black-and-white.
Note
Color
Copies in full color.
Black & White
Copies in black and white regardless of the colors in the original document.
Dual Color
Copies color documents using two colors.
You can change the two colors. For more information, refer to "Dual Color - Non-target Area Color"
(P.350).
Single Color
Copies color documents using one color.
You can change the red color to another one on the screen displayed after selecting [More] > [Single
Color] > [Color]. For more information, refer to "Single Color" (P.350).
More
Displays the [Output Color] screen.
For more information, refer to "[Output Color] Screen" (P.82).
• If the use of certain colors is not allowed, the available colors will be restricted. For more information,
refer to "Account Limit" (P.443).
• If a color document is in one of the following conditions, the machine may copy the document in black
and white.
- The colored area is too small.
- The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For
more information, refer to "Output Color Recognition" (P.326).
Copy
81