Dell C7765dn User Manual page 648

23 Problem Solving
Status Code
026-722
[Cause]
[Remedy] Initialize the USB memory device on a computer with the following file format, and then
Note
026-723
[Cause]
[Remedy] 1)Check that the medium is not inserted or removed, or the other medium is not
026-726
[Cause]
[Remedy] Modify the machine configuration information in the print driver screen to match the
026-727
[Cause]
[Remedy] Take one of the following measures:
026-730
[Cause]
[Remedy] Check whether the paper guides are correctly positioned in the tray, and then try again.
026-736
[Cause]
[Remedy] Execute the operation again. If the error still is not resolved, contact Customer Support
026-737
[Cause]
[Remedy] Consult your network administrator whether the network or the server have any
026-738
[Cause]
[Remedy] Execute the operation again.
027-400
[Cause]
[Remedy] If other messages are displayed, confirm their content. If the control panel is being
027-442
[Cause]
[Remedy] Change the [Auto Stateless Address 1] for IPv6 on the machine, or the IP address of IPv6
027-443
[Cause]
[Remedy] Change the [Auto Stateless Address 2] for IPv6 on the machine, or the IP address of IPv6
648
The USB memory device is not initialized.
execute the operation again.
• Supported file formats: FAT12, FAT16 (FAT), FAT32
• NTFS is not supported.
• A software-encrypted USB memory device is not supported.
If the error still is not resolved, contact Customer Support at dell.com/contactdell.
The machine failed to access to the medium.
inserted, while the machine is referencing the medium.
2)Check that the file in the medium can be accessed via a computer.
The machine configuration information at a print job specification does not match the
actual machine configuration.
actual machine configuration.
Probable causes are as follows:
1)Unusable characters are included in the path name of the file location.
2)The length of the path name of the file location (including extension) exceeds the
number of characters available.
1)Change the path name of the file location.
2)Set the path in the range of 1 to 255 bytes.
The size of paper loaded in the specified tray is unknown.
An internal error occurred while sending the scanned document to the HTTP server.
at dell.com/contactdell.
Unable to send the scanned document to the HTTP server because a network error
occurred.
problem.
The machine failed to send scanned document data to the HTTP server because Web
application is closed during it.
Communications with the machine failed.
operated, terminate the operation. If remote access is being executed, wait until it
completes. If the error still is not resolved, switch off the machine power, make sure that
the touch screen is blank, and then switch on the machine power.
If the problem persists, contact Customer Support at dell.com/contactdell.
The IP address of IPv6 already exists.
on the network device, to remove the duplication of addresses.
The IP address of IPv6 already exists.
on the network device, to remove the duplication of addresses.
Cause and Remedy