Dell C7765dn User Manual page 266

13 Maintenance
The following describes how to calibrate the machine.
1
Select [Calibration] on the [Home] screen.
When [Calibration] is not displayed, follow the procedure below.
1) Press the <Log In/Out> button.
2) Enter the System Administrator's user ID
with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next]
and enter the System Administrator's
passcode, and select [Enter].
Note
3) Select [Tools] on the [Home] screen.
Note
266
-Saturation: Normal
-Color Balance: 0, 0, 0
-Color Shift: Normal
• You can change the above [Copy Defaults] settings after calibration.
• For information on [Copy Defaults], refer to "Copy Defaults" (P.349).
• During calibration, the machine cannot receive print jobs or faxes.
• The default user ID is "admin".
• The default passcode is "1111".
• When the [Home] screen is not displayed on
the touch screen, press the <Home> button.
<Log In/Out> button