Mixed Size Originals (Scanning Different Size Documents Simultaneously) - Dell C7765dn User Manual

3 Copy
Auto Detect
Detects the document size automatically. The following table shows the document sizes that
can be detected automatically.
Note
The document sizes that can be automatically detected depend on [Paper Size Settings] in the
System Administration mode. For more information, refer to "Paper Size Settings" (P.335).
Standard Size
Select a document size from preset options.
You can change the sizes displayed on the screen. For information on the settings, refer to "Original
Size Defaults" (P.356).
Variable Size
Enter the desired scan size when scanning a non-standard size document or when making
copies at a size different from the original document size. You can specify a value in the range
from 15 to 432 mm for the width (X), and a value in the range from 15 to 297 mm for the
length (Y), in 1 mm increments. To help you specify values, use the scales attached on the
upper and left edges of the document glass.
Note

Mixed Size Originals (Scanning Different Size Documents Simultaneously)

You can scan documents of various sizes simultaneously and make copies on each size or a
single size of paper. To use this feature, load the documents in the document feeder.
Note
1
Select [Mixed Size Originals].
100
B5, B5 , B4, A5, A5 , A4,
Auto-detectable
A4 , A3, 8.5 x 11",
Document Size
8.5 x 11" , 11 x 17", 16K ,
8K
• If the document size cannot be detected automatically, a screen to enter the document size appears.
• When the document is loaded in the document feeder, the base point in the Y (length) direction is the
center of the edge. If you specify 100 mm, the scan length will be from 50 mm above to 50 mm below
the center of the document.
• Load documents in landscape orientation. However, always load A5 documents in portrait orientation.
• When loading B5 documents together with A3 documents loaded in landscape orientation or A4
documents loaded in portrait orientation, load B5 documents in portrait orientation.
• If the top left corners of the documents are not aligned properly, the documents may not be scanned
correctly.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5 portrait and
B4 landscape. If another combination of document sizes is used, the documents can be fed at an angle
and may not be copied properly.
Document Feeder Document Glass
B6, B5, B5 , B4, A6, A5, A5 ,
A4, A4 , A3