Dell C7765dn User Manual page 40

2 Product Overview
No. Component
13 US 2/3 Hole Punch Kit
(optional)
2/4 Hole Punch Kit
(optional)
14 Center tray (Top cover of the
finisher transport)
Note
40
Hole-punches outputs.
Note • The distance between the two holes made with the US 2/3 Hole Punch Kit
(US standard) is 70 mm, which is different from the 80 mm distance made
with the 2/4 Hole Punch Kit.
Copies and prints are delivered here when they are unable to be delivered to
the finisher tray. Pull the cover upward when clearing paper jams.
• Remove outputs delivered to the center tray constantly.
Note
• The Finisher-B1 is optional. In this guide, the Finisher-B1 is referred to as the "finisher".
• The power cord connected to the Finisher-B1 is a connecting cord dedicated to the machine. Do not
connect this cord to any other devices than the machine.
Function