Dell C7765dn User Manual page 626

23 Problem Solving
Status Code
016-750
[Cause]
[Remedy] Check whether you are correctly using the application and whether the print instruction
Note
016-751
[Cause]
[Remedy] For 1), use the print driver to print the document.
For more information on the memory, refer to "Allocate Memory" (P.380).
016-752
[Cause]
[Remedy] Change the [Image Quality] setting from [High Resolution] to [High Quality], or from
016-755
[Cause]
[Remedy] Cancel the print protection using Adobe Reader, and try printing again.
016-756
[Cause]
[Remedy] Consult your system administrator.
016-757
[Cause]
[Remedy] Enter the correct passcode.
016-758
[Cause]
[Remedy] Consult your system administrator.
016-759
[Cause]
[Remedy] Consult your system administrator.
016-760
[Cause]
[Remedy] Take one of the following measures:
For more information on [Image Quality], refer to the help of the print driver. For more
information on memory, refer to "Allocate Memory" (P.380).
016-761
[Cause]
[Remedy] Set [Image Quality] to [Standard] and execute the operation again. If the error still is
626
The machine received a printing job ticket with a PDF or XPS from an application that
allows direct transmissions of files, but the printing job ticket data had a grammar or
print instruction unsupported by the machine.
was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report,
and the print data with the printing job ticket ready, and contact Customer Support at
dell.com/contactdell.
• XPS stands for XML Paper Specification.
Probable causes are as follows:
1)During the PDF Bridge processing, a syntax or parameter error occurred, an undefined
command was used, and a PDF file was damaged.
2)When [Print Processing Mode([408])] for the PDF Direct Print feature has been set
to [PS([1])], memory is insufficient.
3)When [Print Processing Mode([408])] for the PDF Direct Print feature has been set
to [PS([1])], a PDF file including OpenType fonts is processed.
For 2), take one of the following measures:
• Use the print driver to print the document.
• Increase PostScript memory.
For 3), create a PDF file in which OpenType fonts are not included.
Unable to process for PDF Bridge because of insufficient memory space.
[High Quality] to [Standard].
Attempted to process a print-protected PDF file.
Do not have permission to use the service.
The passcode is incorrect.
The division does not have permission to use the service.
The number of pages reached the maximum number of pages for this service.
An error occurred during PostScript processing.
• Set [Image Quality] to [High Speed].
• Increase PostScript memory.
An error occurred during image processing.
not resolved, set [Print Page Mode] to [On].
Cause and Remedy