Before Installation; Environment Settings - Dell C7765dn User Manual

24 Install Operation for Eco copy/My Forms/Shortcut Menu

Before Installation

This section describes the procedures required before installation of Eco copy, My Forms,
and Shortcut Menu.

Environment Settings ..............................................................................................................696

SSL / TLS Settings in Dell Printer Configuration Web Tool ...............................................698
Environment Settings
On your machine, settings listed below are required before you enable the features.
SOAP Port
Protocol Settings
Web Browser Setup
Login Type
Access Control
Make the settings from your machine in the [Tools] screen. Follow the steps below to display
the [Tools] screen.
1
Press the <Log In/Out> button on the control panel.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
Note
3
Select [Tools] on the [Home] screen.
696
Items
• Port Status: Enabled
• Port Number: 80
• IP address, subnet mask, and gateway address:
settings for the use in TCP/IP network
environment
• Web Applications Version: V4 (New Version)
• Login Type: [Login to Local Accounts] or
[Login to Remote Accounts]
• User registration
• Device Access: Locked
• The default user ID is "admin".
• The default passcode is "1111".
Required Settings Refer to
"SOAP Port" (P.697)
"Protocol Settings"
(P.697)
"Web Browser Setup"
(P.697)
"Login Type" (P.697)
"Access Control"
(P.698)