Dell C7765dn User Manual page 39

Finisher-B1 (optional)
14
13
12
11
No. Component
1 Tray attachment
2 Booklet unit (optional)
3 Booklet unit side cover
4 Booklet staple cartridge
5 Top cover
6 Finisher tray
7 Creaser unit
8 Staple cartridge
9 Front cover
10 Finisher-B1
11 Front transport cover
12 Hole punch waste container
Install this attachment when delivering A4
tray without stapling.
For more information, refer to "Installing the Tray Attachment on the
Finisher-B1" (P.58).
Staples creased outputs.
Open this cover when replacing the booklet staple cartridge.
Contains staples. Remove this cartridge when replacing or adding staples, or
clearing staple jams.
Open this cover to clear paper jams.
Stapled or creased outputs are delivered here.
Creases outputs in half.
Contains staples.
Open this cover when clearing paper jams or replacing staples.
Staples copies or prints.
Open this cover when discarding punch scraps.
Collects scraps from the puncher.
Machine Components
1
2
3
4
5
6
7
8
9
10
Function
or B5 paper to the finisher
39