Dell C7765dn User Manual page 794

29 Using Access Google Drive™
Status Code
02-101
[Cause]
[Remedy] Check the following settings from Dell Printer Configuration Web Tool:
Note
02-201
[Cause]
[Remedy] Enable Port 9100. Also enable SOAP port, and check that SOAP port number is set to 80.
02-202
[Cause]
[Remedy] Enable SOAP port. Also check that the SOAP port number is set to 80, and that Port
02-203
[Cause]
[Remedy] Check that the SOAP port number is set to 80, and that Port 9100 is enabled.
02-301
[Cause]
[Remedy] Check that the proxy setting and DNS setting are correct.
02-302
[Cause]
[Remedy] Check that the user name and password for proxy server authentication are correct.
02-303
[Cause]
[Remedy] From a computer on the same network, access to the cloud service to check that no filter
03-301
[Cause]
[Remedy] For 1, confirm that the network cables are connected.
04-301
[Cause]
[Remedy] Delete the job flow sheet for automatic uploading, and create a job flow sheet again.
04-303
[Cause]
[Remedy] From a computer or other platforms, access the cloud service and create an account.
04-304
[Cause]
[Remedy] From a computer or other platforms, log in as a user authorized to change the access
794
The required plugin is disabled.
1) Make sure that [Enabled] is checked in [Properties] > [Security] > [Plug-in Settings]
> [Plug-in Settings].
2) Make sure that [Activated] is displayed for [Status] in both [Properties] > [Security]
> [Plug-in Settings] > [List of Embedded Plug-ins] > [GoogleDriveLib] and
[GoogleDrive].
• If the machine power is turned off at an unexpected timing, plug-in may automatically be invalid.
Since Port 9100 is disabled, this feature could not be started.
Since SOAP port is disabled, this feature could not be started.
9100 is enabled.
Since the SOAP port number is incorrect, this feature could not be started.
Since the proxy setting or DNS setting is incorrect, proxy server or DNS name resolution
for the cloud service failed.
An error occurred during proxy server authentication.
A communication error occurred between the proxy server and the cloud service.
setting is enabled.
The network is terminated. Probable causes are as follows:
1) A network cable has been pulled out.
2) Proxy setting is required, but has not been set.
3) The cloud server has a trouble.
For 2, check the proxy setting for the machine.
For 3, wait for a while, and then execute the operation again.
Cannot log in to the cloud service.
The cloud service account does not exist.
The user does not have the right to access the selected folder.
setting for the folder. Then enable the user access.
Cause and Remedy