Http Test - H3C S5100-SI Series Operation Manual

Operation Manual – HWPing
H3C S5100-SI/EI Series Ethernet Switches
10
For detailed output description, see the corresponding command manual.
Note:
If you are downloading a file from the server, you do not need to specify an FTP
operation type. For details, see section

1.3.4 HTTP Test

I. Network requirements
An H3C S5100-SI/EI series Ethernet switch serves as the HWPing client, and a PC
serves as the HTTP server. Perform a HWPing HTTP test between the switch and the
HTTP server to test the connectivity and the time required to download a file from the
HTTP server after the connection to the server is established.
II. Network diagram
Figure 1-5 Network diagram for the HTTP test
III. Configuration procedure
Configure HTTP Server:
Use Windows 2003 Server as the HTTP server. For HTTP server configuration, refer to
the related instruction on Windows 2003 Server configuration.
Configure HWPing Client (Switch A):
# Enable the HWPing client.
<Sysname> system-view
[Sysname] hwping-agent enable
4 15891
5 15772
6 15653
7 9792
8 9794
9 9891
3245
Chapter 1 HWPing Configuration
1 0 2000-04-03 03:59:52.9
1 0 2000-04-03 03:59:37.0
1 0 2000-04-03 03:59:21.2
1 0 2000-04-03 03:59:05.5
1 0 2000-04-03 03:58:55.6
1 0 2000-04-03 03:58:45.8
1 0 2000-04-03 03:58:35.9
Configuring FTP test on HWPing
1-24
client.