Port Security Configuration Task List; Enabling Port Security - H3C S5100-SI Series Operation Manual

Operation Manual – Port Security-Port Binding
H3C S5100-SI/EI Series Ethernet Switches

1.2 Port Security Configuration Task List

Complete the following tasks to configure port security:

Enabling Port Security

Setting the Maximum Number of MAC Addresses
Allowed on a Port
Setting the Port Security Mode
Configuring
Port Security
Features
Ignoring the Authorization Information from the
RADIUS Server
Configuring Security MAC Addresses
1.2.1 Enabling Port Security
I. Configuration Prerequisites
Before enabling port security, you need to disable 802.1x and MAC authentication
globally.
II. Enabling Port Security
Follow these steps to enable port security:
Enter system view
Enable port security
Task
Configuring the NTK feature
Configuring intrusion protection
Configuring the Trap feature
To do...
system-view
port-security enable
Chapter 1 Port Security Configuration
Use the command...
1-5
Remarks
Required
Optional
Required
Optional
Choose one or more
features as required.
Optional
Optional
Remarks
—
Required
Disabled by default