Displaying And Maintaining 802.1X Configuration; Configuration Example - H3C S5100-SI Series Operation Manual

Operation Manual – 802.1x and System Guard
H3C S5100-SI/EI Series Ethernet Switches
The following introduces how to configure the 802.1x re-authentication timer on the
switch.
Follow these steps to configure the re-authentication interval:
Enter system view
Configure a
re-authentication interval

1.5 Displaying and Maintaining 802.1x Configuration

Display the configuration,
session, and statistics
information about 802.1x
Clear 802.1x-related
statistics information

1.6 Configuration Example

1.6.1 802.1x Configuration Example
I. Network requirements
Authenticate users on all ports to control their accesses to the Internet. The switch
operates in MAC-based access control mode.
All supplicant systems that pass the authentication belong to the default domain
named "aabbcc.net". The domain can accommodate up to 30 users. As for
authentication, a supplicant system is authenticated locally if the RADIUS server
fails. And as for accounting, a supplicant system is disconnected by force if the
RADIUS server fails. The name of an authenticated supplicant system is not
suffixed with the domain name. A connection is terminated if the total size of the
data passes through it during a period of 20 minutes is less than 2,000 bytes.
The switch is connected to a server comprising of two RADIUS servers whose IP
addresses are 10.11.1.1 and 10.11.1.2. The RADIUS server with an IP address of
10.11.1.1 operates as the primary authentication server and the secondary
accounting server. The other operates as the secondary authentication server and
primary accounting server. The password for the switch and the authentication
RADIUS servers to exchange message is "name". And the password for the
To do...
system-view
dot1x timer
reauth-period
reauth-period-value
To do...
display dot1x [ sessions
| statistics ] [ interface
interface-list ]
reset dot1x statistics
[ interface interface-list ]
Use the command...
Use the command...
1-24
Chapter 1 802.1x Configuration
Remarks
—
Optional
By default, the
re-authentication interval
is 3,600 seconds.
Remarks
Available in any view
Available in user view