Basic Vlan Interface Configuration - H3C S5100-SI Series Operation Manual

Operation Manual – VLAN
H3C S5100-SI/EI Series Ethernet Switches
Caution:
VLAN 1 is the system default VLAN, which needs not to be created and cannot be
removed, either.
The VLAN you created in the way described above is a static VLAN. On the switch,
there are dynamic VLANs which are registered through GVRP. For details, refer to
"GVRP" part of this manual.
When you use the vlan command to create VLANs, if the destination VLAN is an
existing dynamic VLAN, it will be transformed into a static VLAN and the switch will
output the prompt information.

2.1.3 Basic VLAN Interface Configuration

I. Configuration prerequisites
Before configuring a VLAN interface, create the corresponding VLAN.
II. Configuration procedure
Follow these steps to perform basic VLAN interface configuration:
To do...
Enter system view
Create a VLAN
interface and enter
VLAN interface view
Specify the
description string for
the current VLAN
interface
Use the command...
system-view
interface
Vlan-interface
vlan-id
description text
2-2
Chapter 2 VLAN Configuration
Remarks
—
Required
By default, there is no VLAN
interface on a switch.
Optional
By default, the description string of a
VLAN interface is the name of this
VLAN interface. Vlan-interface1
Interface for example.