H3C S5100-SI Series Operation Manual page 487

To do...
Enter system view
Enter Ethernet port view
Configure the port as the
monitor port
Return to system view
Enter port group view
Mirror incoming ACL
matching packets in the
port group to the monitor
port
4) Configuring traffic mirroring for a port
Follow these steps to configure traffic mirroring for a port:
To do...
Enter system view
Enter Ethernet port view
Configure the port as the
monitor port
Return to system view
Enter Ethernet port view
Mirror incoming ACL
matching packets on the
port to the monitor port
Caution:
User-defined traffic classification rules configured for traffic mirroring in the global
scope or for a VLAN take precedence over the default rules used for processing
protocol packets. The device will perform mirroring action preferentially, which may
affect device management implemented through Telnet and so on.
Use the command...
system-view
interface interface-type
interface-number
monitor-port
quit
port-group group-id
mirrored-to inbound
acl-rule
monitor-interface
Use the command...
system-view
interface interface-type
interface-number
monitor-port
quit
interface interface-type
interface-number
mirrored-to inbound
acl-rule
monitor-interface
1-43
Remarks
—
—
Required
—
—
Required
Remarks
—
—
Required
—
—
Required