Radius Configuration Task List - H3C S5100-SI Series Operation Manual

Operation Manual – AAA
H3C S5100-SI/EI Series Ethernet Switches
Note:
You can use the display connection command to view the connections of Telnet
users, but you cannot use the cut connection command to cut down their connections.

2.2 RADIUS Configuration Task List

H3C's Ethernet switches can function not only as RADIUS clients but also as local
RADIUS servers.
Complete the following tasks to configure RADIUS (the switch functions as a RADIUS
client):
Configuring the
RADIUS client
Configuring the
RADIUS server
Task
Creating a RADIUS Scheme
Configuring RADIUS
Authentication/Authorization Servers
Configuring RADIUS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Maximum Number of RADIUS
Request Transmission Attempts
Configuring the Type of RADIUS Servers to be
Supported
Configuring the Status of RADIUS Servers
Configuring the Attributes of Data to be Sent to
RADIUS Servers
Configuring Timers for RADIUS Servers
Enabling Sending Trap Message when a
RADIUS Server Goes Down
Enabling the User Re-Authentication at Restart
Function
Refer to the configuration of the RADIUS Server.
2-11
Chapter 2 AAA Configuration
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
—