Displaying And Maintaining Port-Based Vlan; Port-Based Vlan Configuration Example - H3C S5100-SI Series Operation Manual

Operation Manual – VLAN
H3C S5100-SI/EI Series Ethernet Switches

2.2.5 Displaying and Maintaining Port-Based VLAN

Display the hybrid or trunk
ports

2.2.6 Port-Based VLAN Configuration Example

I. Network requirements
As shown in
workstation (PC).
For data security concerns, the two servers are assigned to VLAN 101 with the
descriptive string being "DMZ", and the PCs are assigned to VLAN 201.
The devices within each VLAN can communicate with each other but that in
different VLANs cannot communicate with each other directly.
II. Network diagram
Figure 2-1 Network diagram for VLAN configuration
III. Configuration procedure
Configure Switch A.
# Create VLAN 101, specify its descriptive string as "DMZ", and add
GigabitEthernet1/0/1 to VLAN 101.
<SwitchA> system-view
[SwitchA] vlan 101
[SwitchA-vlan101] description DMZ
[SwitchA-vlan101] port GigabitEthernet 1/0/1
[SwitchA-vlan101] quit
# Create VLAN 201, and add GigabitEthernet1/0/2 to VLAN 201.
To do...
display port { hybrid |
trunk }
Figure 2-1, Switch A and Switch B each connect to a server and a
Use the command...
2-6
Chapter 2 VLAN Configuration
Remarks
Available in any view.