Displaying And Maintaining Qos - H3C S5100-SI Series Operation Manual

III. Configuration examples
# Duplicate the incoming packets from network segment 10.1.1.0/24 to monitor port
GigabitEthernet 1/0/4 (assume that GigabitEthernet 1/0/1 is connected to network
segment 10.1.1.0/24 and carries VLAN 2).
1) Method I
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] interface GigabitEthernet 1/0/4
[Sysname-GigabitEthernet1/0/4] monitor-port
[Sysname-GigabitEthernet1/0/4] quit
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1]
monitor-interface
2) Method II
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] interface GigabitEthernet 1/0/4
[Sysname-GigabitEthernet1/0/4] monitor-port
[Sysname-GigabitEthernet1/0/4] quit
[Sysname] mirrored-to vlan 2 inbound ip-group 2000 monitor-interface

1.4.15 Displaying and Maintaining QoS

Display protocol packet
priority configuration
Display the
CoS-precedence-to-Drop-
precedence mapping
Display the
CoS-precedence-to-DSC
P-precedence mapping
Display the
CoS-precedence-to-local-
precedence mapping
Display the
DSCP-precedence
-to-CoS-precedence
mapping
To do...
display protocol-priority
display qos
cos-drop-precedence-m
ap
display qos
cos-dscp-map
display qos
cos-local-precedence-m
ap
display qos
dscp-cos-map
mirrored-to
Use the command...
1-44
inbound ip-group
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
2000