Operation Manual – Multicast
H3C S5100-SI/EI Series Ethernet Switches
Caution:
After an Ethernet switch enables IGMP Snooping, when it receives the IGMP leave
message sent by a host in a multicast group, it judges whether the multicast group
exists automatically. If the multicast group does not exist, the switch drops this IGMP
leave message.
2.2 IGMP Snooping Configuration
The following table lists all the IGMP Snooping configuration tasks:
Table 2-2 IGMP Snooping configuration tasks
Enabling IGMP Snooping
Configuring the Version of IGMP Snooping
Configuring Timers
Configuring Fast Leave Processing
Configuring a Multicast Group Filter
Configuring the Maximum Number of Multicast Groups on a Port
Configuring IGMP Querier
Suppressing Flooding of Unknown Multicast Traffic in a VLAN
Configuring Static Member Port for a Multicast Group
Configuring a Static Router Port
Configuring a Port as a Simulated Group Member
Configuring a VLAN Tag for Query Messages
Configuring Multicast VLAN
Chapter 2 IGMP Snooping Configuration
Operation
2-5
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional