H3C S5100-SI Series Operation Manual page 930

Operation Manual – PoE-PoE Profile
H3C S5100-SI/EI Series Ethernet Switches
[SwitchA] poe-profile Profile2
# In Profile2, add the PoE policy configuration applicable to GigabitEthernet 1/0/6
through GigabitEthernet 1/0/10 ports for users of group A.
[SwitchA-poe-profile-Profile2] poe enable
[SwitchA-poe-profile-Profile2] poe mode signal
[SwitchA-poe-profile-Profile2] poe priority high
[SwitchA-poe-profile-Profile2] poe max-power 15400
[SwitchA-poe-profile-Profile2] quit
# Display detailed configuration information for Profile2.
[SwitchA] display poe-profile name Profile2
Poe-profile: Profile2, 2 action
poe enable
poe priority high
# Apply the configured Profile1 to GigabitEthernet 1/0/1 through GigabitEthernet 1/0/5
ports.
[SwitchA] apply poe-profile Profile1 interface GigabitEthernet1/0/1 to
GigabitEthernet1/0/5
# Apply the configured Profile2 to GigabitEthernet 1/0/6 through GigabitEthernet 1/0/10
ports.
[SwitchA] apply poe-profile Profile2 interface GigabitEthernet1/0/6 to
GigabitEthernet1/0/10
Chapter 2 PoE Profile Configuration
2-5