File Operations - H3C S5100-SI Series Operation Manual

Operation Manual – File System Management
H3C S5100-SI/EI Series Ethernet Switches
Table 1-2
Perform the following configuration in user view.
Table 1-2 Directory operations
Create a directory
Delete a directory
Display the current work directory
Display the information about
specific directories and files
Enter a specified directory
Note:
Only empty directories can be deleted by using the rmdir command.
In the output information of the dir /all command, deleted files (that is, those stored
in the recycle bin) are embraced in brackets.

1.1.4 File Operations

The file system also provides file-related functions listed in
Perform the following configuration in user view. Note that the execute command
should be executed in system view.
Table 1-3 File operations
Delete a file
Restore a file in the
recycle bin
Delete a file from the
recycle bin
Rename a file
describes the directory-related operations.
To do...
To do...
delete [ /unreserved ]
file-url
delete { running-files |
standby-files }
[ /unreserved ]
undelete file-url
reset recycle-bin
[ file-url ] [ /force ]
rename fileurl-source
fileurl-dest
Chapter 1 File System Management Configuration
Use the command...
mkdir directory
rmdir directory
pwd
dir [ /all ] [ file-url ]
cd directory
Use the command...
1-2
Remarks
Optional
Optional
Optional
Optional
Optional
Table 1-3.
Remarks
Optional
A deleted file can be
restored by using the
undelete command if you
delete it by executing the
delete command without
specifying the
/unreserved keyword.
Optional
Optional
Optional