H3C S5100-SI Series Operation Manual page 837

Operation Manual – HWPing
H3C S5100-SI/EI Series Ethernet Switches
Configure the automatic
test interval
Configure the probe
timeout time
Configure the type of
service
Configure the domain
name to be resolved
Configure the IP address
of the DNS server
Start the test
Display test results
II. Configuring HWPing client to send Trap messages
Trap messages are generated regardless of whether the HWPing test succeeds or fails.
You can specify whether to output Trap messages by enabling/disabling Trap sending.
Follow these steps to configure the HWPing client to send Trap messages:
Enter system view
Enable the HWPing client
function
Create a HWPing test
group and enter its view
To do...
frequency interval
timeout time
tos value
dns resolve-target
domain-name
dns-server ip-address
test-enable
display hwping results
[ admin-name
operation-tag ]
To do...
system-view
hwping-agent enable
hwping
administrator-name
operation- tag
Use the command...
Use the command...
1-17
Chapter 1 HWPing Configuration
Remarks
Optional
By default, the automatic
test interval is zero
seconds, indicating no
automatic test will be
made.
Optional
By default, a probe times
out in three seconds.
Optional
By default, the service
type is zero.
Required
By default, the domain
name to be resolved by
DNS is not specified.
Required
By default, no DNS server
address is configured.
Required
Required
The display command
can be executed in any
view.
Remarks
—
Required
By default, the HWPing
client function is disabled.
Required
By default, no test group
is configured.