Configuring A Static Lacp Aggregation Group - H3C S5100-SI Series Operation Manual

Operation Manual – Link Aggregation
H3C S5100-SI/EI Series Ethernet Switches
Follow these steps to configure a manual aggregation group:
Enter system view
Create a manual
aggregation group
Enter Ethernet port view
Add the Ethernet port to
the aggregation group
Note that:
1) When creating an aggregation group:
If the aggregation group you are creating already exists but contains no port, its
type will change to the type you set.
If the aggregation group you are creating already exists and contains ports, the
possible type changes may be: changing from dynamic or static to manual, and
changing from dynamic to static; and no other kinds of type change can occur.
When you change a dynamic/static group to a manual group, the system will
automatically disable LACP on the member ports. When you change a dynamic
group to a static group, the system will remain the member ports LACP-enabled.
2) When a manual or static aggregation group contains only one port, you cannot
remove the port unless you remove the whole aggregation group.

1.4.2 Configuring a Static LACP Aggregation Group

You can create a static LACP aggregation group, or remove an existing static LACP
aggregation group (after that, the system will re-aggregate the original member ports in
the group to form one or multiple dynamic aggregation groups.).
For a static aggregation group, a port can only be manually added/removed to/from the
static aggregation group.
Note:
When you add an LACP-enabled port to a manual aggregation group, the system will
automatically disable LACP on the port. Similarly, when you add an LACP-disabled
port to a static aggregation group, the system will automatically enable LACP on the
port.
Follow these steps to configure a static LACP aggregation group:
To do...
system-view
link-aggregation group agg-id
mode manual
interface interface-type
interface-number
port link-aggregation group
agg-id
Chapter 1 Link Aggregation Configuration
Use the command...
1-8
Remarks
—
Required
—
Required