Voice Vlan Configuration Example (Automatic Mode) - H3C S5100-SI Series Operation Manual

Operation Manual – Voice VLAN
H3C S5100-SI/EI Series Ethernet Switches
1.4 Voice VLAN Configuration Example

1.4.1 Voice VLAN Configuration Example (Automatic Mode)

I. Network requirements
Create a voice VLAN and configure it to operate in automatic mode to enable the port to
which an IP phone is connected to join or exit the voice VLAN automatically and voice
traffic to be transmitted within the voice VLAN.
Create VLAN 2 and configure it as a voice VLAN, with the aging time being 100
minutes.
The IP phone sends tagged packets. It is connected to GigabitEthernet 1/0/1, a
hybrid port, with VLAN 6 being its default VLAN. Set this port to operates in
automatic mode.
You need to add a user-defined OUI address 0011-2200-000, with the mask being
ffff-ff00-0000 and the description string being "test".
II. Network diagram
Device A
GE1/0/1
VLAN 2
010-1001
OUI:0011-2200-0000
Mask:ffff-ff00-0000
Figure 1-2 Network diagram for voice VLAN configuration (automatic mode)
III. Configuration procedure
# Create VLAN 2 and VLAN 6.
<DeviceA> system-view
[DeviceA] vlan 2
[DeviceA-vlan2] quit
[DeviceA] vlan 6
[DeviceA-vlan6] quit
# Set the aging time for the voice VLAN.
[DeviceA] voice vlan aging 100
# Add a user-defined OUI address 0011-2200-000 and set the description string to
"test".
Internet
VLAN 2
Chapter 1 Voice VLAN Configuration
Device B
1-12