Chapter 2 Poe Profile Configuration; Introduction To Poe Profile; Poe Profile Configuration; Configuring Poe Profile - H3C S5100-SI Series Operation Manual

Operation Manual – PoE-PoE Profile
H3C S5100-SI/EI Series Ethernet Switches

Chapter 2 PoE Profile Configuration

2.1 Introduction to PoE Profile

On a large-sized network or a network with mobile users, to help network
administrators to monitor the PoE features of the switch, S5100-SI/EI series Ethernet
switches provide the PoE profile features. A PoE profile is a set of PoE configurations,
including multiple PoE features.
Features of PoE profile:
Various PoE profiles can be created. PoE policy configurations applicable to
different user groups are stored in the corresponding PoE profiles. These PoE
profiles can be applied to the ports used by the corresponding user groups.
When users connect a PD to a PoE-profile-enabled port, the PoE configurations in
the PoE profile will be enabled on the port.

2.2 PoE Profile Configuration

2.2.1 Configuring PoE Profile

Table 2-1 Configure PoE profile
Enter system view
Create a PoE profile and enter PoE
profile view
Configure
the relevant
features in
PoE profile
Quit system view
Operation
Enable the PoE
feature on a port
Configure PoE mode
for Ethernet ports
Configure the PoE
priority for Ethernet
ports
Configure the
maximum power for
Ethernet ports
2-1
Chapter 2 PoE Profile Configuration
Command
system-view
poe-profile
profilename
poe enable
poe mode { signal
| spare }
poe priority
{ critical | high |
low }
poe max-power
max-power
quit
Description
—
Required
If the PoE file is
created, you will
enter PoE profile
view directly through
the command.
Required
Disabled by default.
Optional
signal by default.
Optional
low by default.
Optional
15,400 mW by
default.
—