Qos Configuration; Qos Configuration Task List; Configuring Priority Trust Mode - H3C S5100-SI Series Operation Manual

1.4 QoS Configuration

1.4.1 QoS Configuration Task List

Complete the following tasks to configure QoS:

Configuring Priority Trust Mode

Configuring Priority Mapping
Setting the Priority of Protocol Packets
Configuring Priority Marking
Configuring Traffic Policing
Configuring Traffic Shaping
Configuring Line Rate
Configuring Traffic Redirecting
Configuring VLAN Mapping
Configuring Queue Scheduling
Configuring Traffic Accounting
Enabling the Burst Function
Configuring Traffic Mirroring
1.4.2 Configuring Priority Trust Mode
Refer to
I. Configuration prerequisites
The priority trust mode to be used has been determined.
The port where priority trust mode is to be configured has been determined.
The port priority value has been determined.
II. Configuration procedures
1) Configuring a port to trust port priority
Follow these steps to configure a port to trust port priority:
Enter system view
Enter Ethernet port view
Task
Priority Trust Mode for details about available priority trust modes.
To do... Use the command...
system-view
interface interface-type
interface-number
1-20
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
—
—