Operation Manual – VLAN
H3C S5500-SI Series Ethernet Switches
Table 1-2 Configure a VLAN interface
Enter system view
Create a VLAN interface
and enter VLAN interface
view
Configure IP address of
VLAN interface
Specify the description
string
VLAN interface
Enable
Interface
Note:
Before creating a VLAN interface, the corresponding VLAN must exist. Otherwise, you
cannot create the VLAN interface successfully.
1.4 Port-Based VLAN Configuration
1.4.1 Introduction of Port-Based VLAN
Port-based VLAN is the simplest and most effective VLAN division method. It defines
its VLAN members according to the ports of a switch. After a specified port is added into
a specified VLAN, the port can forward the packets of the specified VLAN.
To do...
system-view
interface vlan-interface
vlan-interface-id
ip address ip-address
{ mask | mask-length }
[ sub ]
for
the
current
description text
the
VLAN
undo shutdown
Use the command...
1-3
Chapter 1 VLAN Configuration
Remarks
—
Required
If the specified VLAN
interface does not exist,
this command will create
it first and then enter
VLAN interface view.
Optional
By default, no IP address
is configured for a VLAN
interface
Optional
By default, the description
string of a VLAN interface
is the name of the VLAN
interface,
such
"Vlan-interface1
interface".
Optional
By default, if all the ports
under the VLAN interface
are
down,
the
VLAN
interface is down; if one or
more ports under the
VLAN interface are up,
the VLAN interface is up.
as