Port-Based Vlan Commands; Display Port - H3C S6550X-HI Series Command Reference Manual

Before you delete a dynamic VLAN or a VLAN locked by an application, you must first remove the
configuration from the VLAN.
Examples
# Create VLAN 2 and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2]
# Create VLANs 4 through 100 and VLAN 200.
<Sysname> system-view
[Sysname] vlan 4 to 100 200
Related commands
display vlan

Port-based VLAN commands

display port

Use
display port
Syntax
display port { hybrid | trunk }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Specifies hybrid ports.
hybrid
: Specifies trunk ports.
trunk
Examples
# Display information about hybrid ports.
<Sysname> display port hybrid
Interface
WGE1/0/1
# Display information about trunk ports.
<Sysname> display port trunk
Interface
WGE1/0/2
to display information about hybrid or trunk ports.
PVID VLAN Passing
100 Tagged: 1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
150-160, 200, 255, 286, 300-302
PVID VLAN Passing
2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
12