NCR 7167 Owner's Manual page 159

7167 Owner's Manual
Example:
MSComm1.Output = Chr$(&H1B) & Chr$(&H7B) & Chr$(n)
Exceptions:
The command is valid only at the beginning of a line.
The Rotated Print command (1B 12) cancels this command.
Select Character Size
Selects the character height using bits 0 to 2 and selects the character width using bits 4 to
7, as follows:
Character Width Selection
Hex
00
10
20
30
40
50
60
70
ASCII: GS ! n
Hexadecimal: 1D 21 n
Decimal: 29 33 n
Value of n: 1 - 8 = vertical number of times normal font
1 – 8 = horizontal number of times normal font
Range of n: 00 – 07, 10 – 17, ... 70 – 77
0
Default of n:
Decimal Width
0 1 (normal)
16 2 (two times width)
32 3 (three times width)
48 4 (four times width)
64 5 (five times width)
80 6 (six times width)
96 7 (seven times width)
112 8 (eight times width)
November 2002
Chapter 6: Commands
137