NCR 7167 Owner's Manual page 165

7167 Owner's Manual
Select Bit Image Mode
Hexadecimal:
Sets the print resolution and enters one line of graphics data into the print buffer. Excess
data is accepted but ignored. Any print command is required to print the data, after which
the printer returns to normal processing mode.
See the illustration graphic representation of the bit image.
In 7156 Emulation Mode, slip graphics are only 7- bit (MSB not printed.) In 7158 Native
Mode and 7167 Native Mode., slip graphics are 8-bit.
Values:
Receipt Station
Value
of m
ASCII: ESC * m n1 n2 d1 ... dn
1B 2A m n1 n2 d1 ... dn
27 42 m n1 n2 d1 ... dn
Decimal:
Mode
0 8 Dot Single 8 (68 DPI)
Density
1 8 Dot Double 8 (68 DPI)
Density
32 24 Dot Single 24 (203 DPI) 0-288 (101DPI,
Density
33 24 Dot 24 (203 DPI) 0-576 (101DPI,
Double
Density
No. of Dots No. of Dots (Horizontal)
(Vertical)
0-288 (101DPI,
80mm)
0-212 (101DPI,
58mm)
0-576 (101DPI,
80mm)
0-424 (101DPI,
58mm)
80mm)
0-212 (101DPI,
58mm)
80mm)
0-424 (101DPI,
58mm)
November 2002
Chapter 6: Commands
Number of
Dots/Line
8x288 (80mm)
8x212 (58mm)
8x576 (80mm)
8x424 (58mm)
24x288
(80mm)
24x212
(58mm)
24x576
(80mm)
24x424
(58mm)
143