NCR 7167 Owner's Manual page 200

7167 Owner's Manual
m
0
1
2
3
4
5
6
10
Second Variation: Length of Byte Specified at Beginning of String
m =
d =
n =
The value of m selects the bar code system as described in the table. When data is present
in the print buffer, the printer processes the data following m as normal data.
The variable d indicates the character code to be encoded into the specified bar code
system. See the table. If character code d cannot be encoded, the printer prints the bar code
data processed so far, and the following data is treated as normal data.
178
Bar Code D
UPC-A 48- 57 (ASCII numerals)
UPC-E 48- 57
JAN13 (EAN13) 48- 57
JAN8 (EAN8) 48- 57
Code 39 48- 57,
65- 90 (ASCII alphabet),
32, 36, 37, 43, 45, 46, 47
(ASCII special characters)
d1 = dk = 42 (start/stop
code is supplied by
printer if necessary)
Interleaved 2 of 5 48- 57
(ITF)
CODABAR 65- 68, start code
48- 57, 36, 43, 45, 46, 47, 58
(NW-7)
PDF 417 1-255
(7158 Native Mode
and 7167 Native
Mode)
65 - 73, 75 (see the table)
0 - 127 (see the table)
1 - 255 (see the table)
n, Length
Fixed Length: 11, 12
Fixed Length: 11, 12
Fixed Length: 12, 13
Fixed Length: 7, 8
Variable Length
Variable Length
(Even Number)
Variable Length
Variable Length
7158 Native Mode
and 7167 Native
Mode
November 2002
Chapter 6: Commands