NCR 7167 Owner's Manual page 119

7167 Owner's Manual
Select Sensors to Stop Printing
Hexadecimal:
If this bit of n is 1
Bit 0, or bit 1
Bit 4
Bit 5
Default:
Determines which sensor causes the printer to stop printing on the respective station. The
command does not affect the paper out sensor on the receipt station, which will
automatically stop the printer when the paper is depleted.
Example:
This statement causes the receipt to stop on paper low and the slip to stop if the leading edge I
MSComm1.Output = Chr$(&H1B) & Chr$(&H63) & Chr$(&H34) & Chr$(&H21)
All other bits are ignored.
ASCII: ESC c 4 n
1B 63 34 n
Decimal: 27 99 52 n
Value of n :
Function Performed
Stop Receipt on Receipt Low
Stop Slip if Trailing Edge Uncovered
Stop Slip if Leading Edge Uncovered
0
s uncovered (bits 0 and 5 equal to 1 yields hexadecimal 21 - binary 00100001):
November 2002
Chapter 6: Commands
97