7167 Owner's Manual
Installing the Ribbon Cassette
1. Tighten the ribbon by turning the knob in the direction of the arrow.
2. Position the ribbon cassette slot at the catch on the printer slip frame and push it
into place.
Be sure the ribbon is in front of or underneath the print head.
Tighten the ribbon using the shaft at the upper left corner of the cassette. Rotate
the shaft clockwise until the ribbon is positioned between the print head and the
metal ribbon guide.
3. Close the front cover.
1
Slot
Chapter 2: Setting Up and Using the Printer
Cantilever Frame
November 2002
Catch
Slot
Front
Cover
45