Asian Character Commands - NCR 7167 Owner's Manual

7167 Owner's Manual

Asian Character Commands

Select print modes for Kanji characters
Hexadecimal:
Bit
0
1
2
3
4
5
6
7
Default of n:
Selects character attribute for Asian character.
The underline mode can be turned on or off by using FS – or ESC – also.
The thickness of underline is defined by FS – or ESC -, it does not relate to character size.
Example:
MSComm1.Output = Chr$(&H1C) & Chr$(&H21) & Chr$(n)
ASCII: FS ! n
1C 21 n
Decimal: 28 33 n
The character attribute for Asian character
Value of n:
Off/On Hex
- -
Off 00
Off 00
On 01
Off 00
On 01
- -
- -
- -
Off 00
On 01
0
Decimal Function
- Select font
0 Undefined
0 Double width mode is not selected
1 Double width mode is selected
0 Double height mode is not selected
1 Double height mode is selected
- Undefined
- Undefined
- Undefined
0 Underline mode is not selected
1 Underline mode is selected
November 2002
Chapter 6: Commands
209