NCR 7167 Owner's Manual page 218

7167 Owner's Manual
ESC w p T '/ A '/ C '/ S <CR>
All characters in the transit number
Field separator: /
All characters in the account number
Field separator: /
All characters in the check number
Field separator: /
Two-digit status
Final Carriage Return
Notes
All parameters are ASCII characters, i.e. greater than or equal to 0x20, with the exception
of a non-ASCII character enclosed in single quotes as a field separator. This applies both
to parameter specifications sent from application to printer, and to MICR data returned
from printer to application.
Parameters are positional; their order in the parameter string is the order in which the
parsed MICR data will be returned. Unrecognized parameters will be ignored, and
processing of the parsing parameters will stop. Any data remaining after the unrecognized
parameter will be treated as normal input data.
If parameters are not defined (for example, 1B 77 50 <CR> or 1B 77 70 <CR>) parsing is
not selected. One status byte followed by all decoded MICR characters will be returned.
This is the default parsing format if no other is selected:
Status
Good read, data follows
Bad read, data follows
No check present, no data
Paper jam, no data
No MICR characters, no
data
MICR Characters
Numerics
Unrecognized Character
Space
Amount symbol
Dash symbol
"on us" symbol
Transit symbol
196
Status Byte Value
0x00
0x01
0x02
0x03
0x04
ASCII Hexadecimal
0...9 0x30...0x39
? 0x3F
0x20
& 0x26
' 0x27
( 0x28
) 0x29
November 2002
Chapter 6: Commands