Configuring The Printer; Main Menu - NCR 7167 Owner's Manual

7167 Owner's Manual

Configuring the Printer

Use the Configuration Menu to select functions or change various settings as indicated in
the preceding sections. The Configuration Menu prints instructions and setting options
interactively as the user goes through the configuration process.
Caution: Be extremely careful in changing any of the printer settings to avoid changing
settings that might affect the performance of the printer.
Bottom
Cover
1. Set DIP Switch 2 to Off, Switch 1 to On.
2. Reset the printer.
For resetting the printer instruction see Chapter 2 page 13
This configuration menu allows you to set mechanical adjustment parameters and select
printer test.
Sub-menus are entered and selections are made using the Paper Feed Button.
Press the paper feed for the configuration you want.
Defaults are marked with asterisk (*).

******** Main Menu ********

*******************************
Select a sub-menu:
Enter code, then hold Button DOWN
at least 1 second to validate
- Short Click: Feed Button is quickly depressed and released
Long click: Feed Button is held down more than 1 second
-
- EXIT
- Print Current Configuration
- Set Communication Interface
- Set Diagnostics Modes
- Set Emulation/Software Options
- Set Hardware Options
- Set Default Code page
- Set EEPROM To Default Settings
-> 1 Click
-> 2 Clicks
-> 3 Clicks
-> 4 Clicks
-> 5 Clicks
-> 6 Clicks
-> 7 Clicks
-> 8 Clicks
November 2002
Chapter 4: Diagnostics
56