NCR 7167 Owner's Manual page 162

7167 Owner's Manual
Turns superscript or subscript modes on or off. This attribute may be combined with other
characters size settings commands ( 12, 13, 1B 21 n, 1D 21 n, ...)
This command is only available on the receipt station in 7158 Native Mode and 7167
Native Mode..
Example:
MSComm1.Output = Chr$(&H1F) & Chr$(&H05) & Chr$(n)
Exceptions:
This command is ignored if n is out of the specified range.
This is only available in 7158 Native Mode and 7167 Native Mode..
140 November 2002
Chapter 6: Commands