NCR 7167 Owner's Manual page 194

7167 Owner's Manual
Default:
Example:
MSComm1.Output = Chr$(&H1D) & Chr$(&H61) & Chr$(n)
Exceptions
If n = 0, ASB is disabled.
Related Information
When Auto Status Back (ASB) is enabled using this command, the status transmitted by
other commands and the ASB status are differentiated according to the information found
in Recognizing Data from the printer, (in the Real Time Commands section in this
chapter). The status bytes to be transmitted are described in the following four tables.
Byte 1 =
Byte 2 =
Byte 3 =
Byte 4 =
First Byte (Printer Information)
Bit
0
1
2
3
4
5
6
7
172
0 (ASB disabled)
printer information
error information
paper sensor information
paper sensor information
Off/On Hex Decimal
Off 00 0
Off 00 0
Off 00 0
On 04 4
Off 00 0
On 08 8
On 10 16
Off 00 0
On 20 32
Off 00 0
On 40 64
Off 00 0
Status for ASB
Not used. Fixed to off.
Not used. Fixed to off.
One or both cash drawers open.
Both cash drawers closed.
Not Busy at the RS232C interface.
Printer is Busy at the RS232C interface.
Not used. Fixed to on.
Receipt cover closed.
Receipt cover open.
Paper Feed Button is not pressed.
Paper Feed Button is pressed.
Not used. Fixed to off.
November 2002
Chapter 6: Commands