Hardware Options - NCR 7167 Owner's Manual

7167 Owner's Manual
Press the Paper Feed Button for the receipt synchronization mode option you want.
** SET RECEIPT SYNCHRONIZATON MODE ?
YES
NO
Enable Receipt Sync.*
Disable Receipt Sync.
Note: Press the Paper Feed Button for at least one second to validate the selection.
Save Parameters
This function allows to save the selected emulations/software settings or return to the
emulations/software settings to select additional options.
Press the Paper Feed Button for the option you want.
Save new parameters ?
YES
NO, MODIFY

Hardware Options

Print Density
This function makes it possible to adjust the energy level of the print head to darken the
printout. An adjustment should only be made when necessary. The factory setting is 100%.
Warning: Choose an energy level no higher than necessary to achieve a dark printout.
Failure to observe this rule may result in a printer service call or voiding of the printer
warranty. Consult your NCR technical support specialist if you have any questions.
Press the Paper Feed Button for the print density you want.
** SET PRINT DENSITY ?
YES
NO
100 %*
110 %
120 %
Enter code, then hold Button DOWN
At least 1 second to validate
Note: Press the Paper Feed Button for at least one second to validate the selection.
Maximum Power Option
This function allows the user to set the maximum power for the printer to 75W or 55W.
Press the Paper Feed Button for the option you want.
-> Long Click
-> Short Click
-> Long Click
->Short Click
-> Long Click
-> Short Click
-> Long Click
-> Short Click
-> 1 Click
-> 2 Clicks
-> 3 Clicks
November 2002
Chapter 4: Diagnostics
67