NCR 7167 Owner's Manual page 201

7167 Owner's Manual
m
65
66
67
68
69
70
71
72
73
75
Example:
MSComm1.Output = Chr$(&H1D) & Chr$(&H6B) & Chr$(m) & "123456789012" & Chr$(0)
The above command will print the number above or below the bar code, depending on
which parameter for m that specify.
Exceptions:
Illegal data cancels this command.
The command is valid only at the beginning of a line.
PDF 417 format cannot be printed on the slip.
Barcodes on the Slip are always right justified.
PDF417 and Code 93 are only available in 7158 Native Mode and 7167 Native Mode.
Bar Code D
UPC-A 48- 57 (ASCII numerals)
UPC-E 48- 57
JAN13 (EAN13) 48- 57
JAN8 (EAN8) 48- 57
CODE 39 48- 57, 65- 90 (ASCII
alphabet),
32, 36, 37, 43, 45, 46, 47
(ASCII special characters)
d1 = dn = 42 (start/stop
code is supplied by
printer if necessary)
Interleaved 2 of 5 48- 57
(ITF)
CODABAR 65- 68, start code 48- 57,
36, 43, 45, 46, 47, 58
(NW-7)
Code 93 0 - 127
Code 128 0-105
d1 = 103-105 (must be a
Start code)
d2 = 0-102 (data bytes)
(Stop code is provided by
the printer)
PDF417 0 – 255
n, Length
Fixed Length: 11, 12
Fixed Length: 11, 12
Fixed Length: 12, 13
Fixed Length: 7, 8
Variable
Variable
(Even Number)
Variable
Variable
(7158 Native Mode
and 7167 Native
Mode only)
Variable
Variable Length
(7158 Native Mode
only and 7167
Native Mode)
November 2002
Chapter 6: Commands
179